dehn 105 351 Installation Instructions Manual page 25

Note:
When positioning the tripod, ensure that the brace, which is located in the angle of inclination of the
air-termination rod (adapter), is always aligned in parallel to the outer edge of the roof
(see Fig. 7, page 11).
Fig. 7 Tripod adapted to a roof pitch of max. 10°
StSt air-termination tip,
Ø 10 mm, 1000 mm (round)
2x M8 locking screw(s); 15 Nm
supporting tube, Ø 50 mm,
3200 mm long (round)
tripod
aligned in parallel
11