Factory Reset; Resetting The Connectstation Via Admin Interface; Resetting The Connectstation Via Usb Keyboard; Resetting The Access Point - Sennheiser MobileConnect User Documentation

Factory reset

Resetting the ConnectStation via Admin Interface

To reset the ConnectStation to factory settings:
▷ Connect your computer to LAN3 of the ConnectStation.
Open a browser and navigate to 192.168.0.10.
▷
▷ Login with your user credentials.
▷ In the Update & Reset tab click on Perform reset now.
The ConnectStation will be reset to factory settings.

Resetting the ConnectStation via USB keyboard

To reset the ConnectStation via USB keyboard:
▷ Connect the access point to the ConnectStation.
Power up both the ConnectStation and the access point.
▷
▷ Wait until the system is ready (2-3 min).
Connect a USB keyboard to one of the USB sockets of the ConnectSta-
▷
tion.
Type reset and press Enter.
▷
▷ The ConnectStation and the access point will be reset to factory set-
tings.
▷ Log into the admin interface with the default login details:
• Username: admin
• Password: sennheiser
▷ If the admin interface shows that the access point is not getting
connected, a hard reset of the access point has to be performed. See
below: "Resetting the access point").

Resetting the access point

To reset the access point Ruckus ZoneFlex 7372 to factory settings:
Disconnect the access point from its power supply.
▷
▷ Press and hold the RST (reset) button of the access point.
▷ Insert the power supply into the access point while holding the RST
button.
▷ Hold the RST button for approximately 15 seconds.
The access point will be reset to factory settings.
Factory reset
78