After the update has been installed, the following message is displayed:
When the update is completed, remove the USB device.
▷
►
Click on Restart Now to restart the ConnectStation.
▷
►
When the update is finished the system will redirect you to the Admin In-
terface.
▷
Perform an extra reload/refresh ob the web page.
Update from 3.0.x: After the update, the ConnectStation will automatically
select the previously used network mode. For changing the network mode
see "Selecting the network mode".
Update from 2.0.3: After the update, perform a factory reset of the
ConnectStation and select the desired network mode. See "Factory reset"
and "Selecting the network mode".
System update
77