DeWalt DW558K Manual page 24

E N G L I S H
Various types of 19 mm Hex. chisels and points are
available as an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
• The Demolition Hammer is not user-serviceable.
Take the tool to an authorized D
agent after approximately 100 hours of use.
If problems occur before this time contact an
authorized D WALT repair agent.
E
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Accessory maintenance
Accessory maintenance at the right time guarantees
optimal results in application and a long and efficient
accessory life.
• Grind the chisels on grinding disks. Refer to fig. D
for the appropriate angles of the following chisels:
- spade-shaped chisel (13)
- cold chisel (14)
- pointed chisel (15)
- U-shaped chisel (16)
- hollow chisel (17)
- mortar chisel (18)
- toothed chisel (19)
• These chisels can be reground only a
limited number of times. If in doubt,
contact your dealer for recommendations.
• Ensure that the cutting edge does not
show discoloration caused by too much
pressure. This may impair the hardness
of the accessory.
en - 5
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
WALT repair
E
WALT repair
E
16