Finding your Preset station
1 Preset RADIO ON-OFF once or more to select the desired
2 Press the preset number of your desired station.
Erasing the Preset Memory by RESET
Use a ball-point pen to press the RESET button.
™ You will hear a click to indicate that all preset stations
stored and the last station tuned to have been cleared.
All settings must now be reprogrammed into the memory.
1 Open the cassette door and insert a tape.
2 Press the cassette door lightly to shut.
3 Connect headphones to the p socket.
4 To start playback, press 1 2
™ The display shows tAPE and the analog clock
throughout the tape mode
5 Adjust the sound with the VOLUME and DBB controls.
6 To fast wind, press 11, to rewind press 22. Press 9 to stop
7 To reverse the tape direction during playback, adjust the
DIRECTION 1 2 control.
8 To stop playback, press 9 and the set is switched off.
™ The display shows OFF before reverting to the clock
The tape direction will be automatically reversed each time the
tape reaches the end. Cassette playback continues in this way
unless you press 9 or until batteries are exhausted.