1 x AY 3660 stereo headphones, 1 x Belt clip
Using the Belt Clip
1 To attach the belt clip, position the shaped grip on the
reverse so that it fits into the belt clip hole.
2 Simultaneously, press and turn the clip to LOCK as indicated
on the set.
3 To detach, gently lift the belt clip and turn to RELEASE as
indicated on the set.
TAKE CARE WHEN USING HEADPHONES
Listen at a moderate volume. Use at high volume can impair
Do not use headphones while driving or cycling as you may
cause a traffic accident!
• For quality playback, clean the magnetic head after every 50
hours of operation or, on average once a month by playing
through a cleaning tape.
• Do not expose the set and cassettes to rain, moisture, sand,
or to excessive heat e.g. heating equipment, cars parked in
1 The packaging has been minimized so that it is easy to
separate into two mono-materials: cardboard, and
polyethylene. Please observe the local regulations regarding
the disposal of these packaging materials.
2 Please inquire about local regulations on how to hand in
your old set for recycling.
3 Batteries contain chemical substances, so they
should be disposed of properly.