Table of Contents
Advertisement
The following symbols are used in this document to alert the reader to areas of potential hazard:
DANGER indicates an imminently
hazardous situation which, if not
avoided, will result in death or seri-
ous injury.
WARNING indicates a potentially haz-
ardous situation which, if not avoided,
could result in death or serious injury.
External wiring, unless specified as an optional connection in the manufacturer’s product
line, is NOT to be connected inside the micro panel cabinet. Devices such as relays, switches,
transducers and controls may NOT be installed inside the micro panel. NO external wiring
is allowed to be run through the micro panel. All wiring must be in accordance with YORK’s
published specifications and must be performed ONLY by qualified YORK personnel. YORK
will not be responsible for damages/problems resulting from improper connections to the
controls or application of improper control signals. Failure to follow this will void the
manufacturer’s warranty and cause serious damage to property or injury to persons.
10
IMPORTANT!
READ BEFORE PROCEEDING!
GENERAL SAFETY GUIDELINES
SAFETY SYMBOLS
CAUTION identifies a hazard which
could lead to damage to the machine,
damage to other equipment and/or en-
vironmental pollution. Usually an in-
struction will be given, together with a
brief explanation.
NOTE is used to highlight additional
information which may be helpful to
you.
Advertisement
Table of Contents
