Control Panel Operation - Sargent EC175 Series Manual

EC360 Digital Control Panel (LCD display)

2.6 Control Panel Operation

Button Button Description
Power button. Press the power button to turn the leisure power on. Press the button
again to turn the power off. The adjacent LED will illuminate when the power is on, and
also the voltage of the selected battery will be displayed on the screen. When the car
engine is running this LED will flash to indicate the leisure battery is being charged.
Pump button. With the power on, press the pump button to turn the water pump on.
Press the button again to turn the pump off. The adjacent LED will illuminate when the
pump is on, and also the level of the water tank will be displayed on the screen (if the
optional onboard water tank is fitted).
Light button. With the power on, press the light button to turn the main internal lighting on.
Press the button again to turn the lights off. The adjacent LED will illuminate when the
lights are on. The lights will be turned on and off automatically each time the power button
is operated.
Awning Light button. With the power on, press the awning light button to turn the awning
light on or off. The adjacent LED will illuminate when the light is on.
EC360
Levels / scroll button. Use
this button to scroll through the
various levels screens / menu
items or to cancel alarms /
warnings. Note: The screen
illumination / backlight will turn
off after a period of time. Press
the levels button to reactivate
the illumination.
Select button. Use this button
to select options / items or to
change settings.
Issue 1
EC175 Power Control System
V
Page 4 of 14
EC350
Select / show leisure button. Use this
button to select the leisure battery. If the
battery is already selected the button will
display the battery voltage on the LED bar
L
graph display.
The LED next to the button will turn on to
show the battery is selected.
Select / show vehicle button. If the tow
vehicle is connected and you need to use
the vehicle battery, press this button to
select it.
If the battery is already selected the button
will display the battery voltage on the LED
bar graph display.
The LED next to the button will turn on to
show the battery is selected.
20 July 2014