Operation While Driving - Sargent EC175 Series Manual

2.4 Operation while driving

The EC175 system is designed to shutdown parts of the system whilst the car engine is running. This
is to meet Electro Magnetic Compatibility (EMC) regulations and to ensure the safe operation of the
system.
Please ensure the system shutdown switch on the PSU is in the "on" (button in) position before towing
(see 2.2). This will ensure the electronic system is active and will therefore be able to control the
charging process, supply the refrigerator and monitor other system circuits.
2.5 Control Panel - Component Layout
EC350 Digital Control Panel (LED display)
Issue 1
EC175 Power Control System
PSU – 230V Controls
Page 3 of 14
Lever type switch, far left – Residual Current
Device (RCD) and main 230V on / off switch.
Push button, far left – RCD Test button.
3 x lever switches, right – Miniature Circuit
Breakers (MCB). Note the lever colour and MCB
rating may vary. See the safety and rating
sticker adjacent to the PSU for further details.
Green push switch, far right – Charger switch,
this switch turns the 12V battery charger on or
off. In is ON out is OFF.
Amber push switch – Heater switch, this switch
turns the 230V supply to the combination water
heater / central heating system on or off. In is
ON out is OFF.
Note the far left 12V DC Shutdown switch is
covered in section 2.2.
20 July 2014