Control Panel Details - Sargent EC328 User Instructions

1 Template
Instructions
<<Delete before
use>>
Voltage
Battery
Vehicle
Leisure

4 Control Panel Details

4.1 Layout and Buttons
The following diagram shows the control panel layout and button functions.
Note: to remove the decorative bezel, pull down and lift forward as indicated by the
Item
Power ON / OFF
Battery SELECT
Issue 01
EC328 Power Control System
Action after cut off
cut off
Battery selection is
changed from Vehicle
battery to Leisure
10.9v battery. If the leisure
battery is below 9v
then a further warning
will occur (see below).
9v Power is turned off
Function
Use to turn the main leisure power on and
off.
Use to select the Leisure or Vehicle battery.
Press the button to toggle between the
leisure and vehicle batteries. When a
battery is selected this battery will be used
as the power source and will also be
charged by the charger.
This cut off level is designed to protect the vehicle
battery from over discharge. The 10.9v level
ensures there is sufficient power in the battery to
run the vehicle electronics and start the vehicle.
This cut off only applies to power drawn from the
battery by the leisure equipment; it will not protect
the battery if you leave the vehicle lights on.
This is an emergency cut off level to protect the
battery from severe damage. You should not rely
on this cut off level during normal operation, but
manage your power consumption to a discharge
This cut off only applies to power drawn from the
battery by the leisure equipment that is controlled
by the control panel power switch; it will not protect
the battery from discharge by the radio or other
permanently connected equipment.
Options / Notes
The adjacent LED is illuminated when
the power is ON.
The adjacent LED is illuminated when
the VEHICLE battery is selected; by
default when the power is initially turned
on the Leisure battery is selected and is
indicated by the battery select LED off.
Page 5 of 15
Notes
level of 10v.
blue arrows.
June 2011