Rinnai Sensei N-Series Service Presentation page 113

Cascading Multiple Units – Commercial ONLY
Programming Cascade Communication: Display examples.
-
When the primary and secondary units are designated through the parameter settings the display will be as
shown below.
When the Primary unit is designated
through parameter setting #08 the
displays will show the set temperature.
Secondary units will show "- - -"
After the Primary unit is designated,
press the On/Off button on the
secondary units in order. The displays
will change from the "---" to show the
ID number of each unit in the Cascade
system.
© 2015 Rinnai America Corporation
PROPRIETARY and CONFIDENTIAL
120
120
Enhancing Lives By Changing The Way Water Is Heated
Primary Secondary
#1
---
-
01
113
Secondary Secondary
#2 #3
--- ---
- -
02 03
11/6/2018