Go/No-Go Test; Rf Test Fixture (Conducted Test Method) - Sony Ericsson K530i Test Instructions

3.2

Go/No-Go Test

This test verifies that the radio parameters of a mobile fulfil the GSM / WCDMA
specifications. A mobile is considered good if all measurements pass. All results will
be presented on the screen and can be printed out if a printer is available.
3.2.1

RF Test Fixture (Conducted Test Method)

1. Remove the battery cover and RF plug according to Working Instructions,
Mechanical.
2. Insert a test USIM that is compatible with your Test Instrument and install a fully
charged standard battery to the mobile.
NOTE!
3. Attach the RF Probe/RF Holder to the mobile according to the pictures.
4. Install the RF Cable to the RF Probe.
2/000 21-2/FEA 209 544/136 C
©
Company Internal Sony Ericsson Mobile Communications AB
A Battery Eliminator (Dummy Battery) may be used in place of a
standard fully charged battery if you use a power supply that meets the
requirements that are documented in the Electrical Equipment List.
Test Instruction, Electrical
3(11)