True TBR Series Installation Manual page 29

TRUE
TBR | TDR SERIES
SERVICING & REPLACEMENT COMPONENTS
SWING DOOR GASKET REPLACEMENT
– You will now need to silicone each of the 4 corners
STEP 2
of the door. For narrow gaskets (see image 2a), and for wide
gaskets (see image 2b).
– Once silicone has been applied to corners, push gaskets
STEP 3
back into original tracks. Continue this around the door gasket.
Press corners in (see image 3). This will allow the silicone to seal
any possible air leaks. It is common to see silicone being pushed
out of track around the gasket, this is how you will know enough
silicone was used.
– Clean any silicone that might have been pushed out
STEP 4
of the corners.
Gasket color may vary depending on unit.
NOTE:
(CONT.)
2a
2b
3
truemfg.com
27