Door Replacement - John Lewis JLAFF2010 Instruction Manual

Connection
2. Remove keeper by rotating it
wires
Connection
clockwise ( ① ) and then remove the
wires
upper hinge by lifting it up (
Connection
wires
Upper hinge
Upper hinge
Upper hinge
3. Remove the refrigerator compartment
door by lifting it up.
Lower hinge
Lower hinge
Pass the refrigerator
Pass the refrigerator laterally through the
access door as illustrated.

Door replacement

Once the fridge is through the access door,
remount the fridge doors by following the
door removal instructions in reverse.
OM.indd 9
② ).
Keeper
Keeper
Keeper
Lower hinge
Feed water pipe
installation
• Automatic ice maker operation needs
water pressure of 147~834kPa
(1.5~8.5kgf/cm ) (The pressure is correct
2
when an instant paper cup (180cc) is filled
in 3 sec.).
• If water pressure does not reach the
rating 147kPa(1.5kgf/cm
is necessary to purchase a separate
pressure pump for normal automatic icing
and cool water feed.
• Keep the total length of the feed water
pipe tube within 8m and be careful that
the tube does not bend. If the tube is
8m or longer it may cause water feed
problems owing to the drain water
pressure.
• Install the feed water pipe tube at a place
free from heat.
• Connect to drinking water supply only.
• Refer to instructions with water filter kit
for installation.
9
) or below, it
2
2011-01-27 07:38:56