Electrical Connection - John Lewis JLAFF2010 Instruction Manual

Sxs refrigerator
Table of Contents

Advertisement

Electrical connection

Any electrical work required to install
this appliance should be carried out by a
qualified electrician or competent person.
Warning! THIS APPLIANCE MUST
BE EARTHED.
Should the appliance power supply
cable need to be replaced, this must
be carried out by an approved service
engineer. The manufacturer declines
any liability should this safety measure
not be observed.
Before switching on, make sure the
electricity supply voltage is the same as that
indicated on the appliance's rating plate.
The appliance is supplied with a 13amp plug.
In the event of having to change the fuse in
the plug supplied, a 13amp ASTA approved
BS 1363/A fuse must be used.
Should the plug need to be replaced for
any reason, proceed as described below.
The wires in the mains lead are coloured in
accordance with the following code:
GREEN AND YELLOW EARTH
BLUE
BROWN
Green and Yellow (Earth)
Brown(Live)
Blue(Neutral)
Green and Yellow (Earth)
Brown(Live)
As the colours of the wires in the mains
Blue(Neutral)
lead of this apparatus may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Green and
Yellow must be connected to the terminal
in the plug which is marked with the letter
E or by the earth symbol(
Green or Green and Yellow.
The wire which is coloured Blue must be
OM.indd 7
connected to the terminal which is marked
with the letter N or coloured Black.
The wire which is coloured Brown must be
connected to the terminal which is marked
with the letter L or coloured Red.
If a 13 amp(BS 1363) plug is used, fit a 13
amp BS 1362 fuse.
NEUTRAL
LIVE
Fuse
Cord
grip
Fuse
Cord
grip
) or coloured
7
Warning! A cut off plug inserted into
a 13 amp socket is a serious safety
(shock) hazard.
Ensure that the cut off plug is disposed
of safely.
Warning! The plug must still be
accessible after the appliance has
been installed.
Warning! The appliance should not
be connected to the electrical supply
by means of an extension cable.
2011-01-27 07:38:52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents