Installation - John Lewis JLAFF2010 Instruction Manual

Installation

This instruction manual provides general
operating instructions for your model. Use
the refrigerator only as instructed in this
instruction manual. Before starting the
refrigerator, follow these important
first steps.
Where to install
• Place your appliance where it is easy to
use.
• Avoid placing the unit near heat sources,
direct sunlight or moisture. Do not
operate the appliance outdoors where it
can be exposed directly, or indirectly to
sun, wind and rain.
• To ensure proper air circulation around
the fridge -freezer, please maintain
sufficient space on both the sides as well
as top and maintain at least
2 inches (5cm) from the rear wall.
• To avoid vibrations, the appliance must be
levelled.
• Do not install the appliance in
temperatures of less than 5°C as the
performance may be affected.
Climatic class
• Place your appliance where it is easy to
use.
• Avoid placing the unit near heat sources,
direct sunlight or moisture. Do not
operate the appliance outdoors where it
can be exposed directly, or indirectly to
sun, wind
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +36°C
T +16°C to +43°C
OM.indd 6
Levelling and door
adjustment
• To level by adjusting freezer door side:
Level the door by inserting flat ( – type)
driver into the groove of the left height
Left height
adjustment screw
adjusting screw and rotate it clockwise (
• To level by adjusting fridge door side:
adjustment screw
Level the door by inserting flat ( – type)
driver into the groove of the right height
adjusting screw and rotate it clockwise (
After levelling
The refrigerator doors will close smoothly
by adjusting the front side using the height
adjustment screw. If the doors do not close
correctly, performance may be affected.
6
Left height
adjustment screw
①
Right height
②
2011-01-27 07:38:51
).
Right height
adjustment screw
).