Shure ANI22 Manual page 22

ANI22 Audio Network Interface
< REP AUDIO_SUMMING_MODE 1+2/3+4 >
< SET AUDIO_SUMMING_MODE 1+2/3+4 >
< REP AUDIO_SUMMING_MODE 1+2/3+4 >
< REP INPUT_METER_MODE PRE_FADER >
< REP INPUT_METER_MODE POST_FADER >
22/24
ANI22 Response:
< REP xx PEQ yy ON >
< REP xx PEQ yy OFF >
Get Audio Summing Mode
Command String:
< GET AUDIO_SUMMING_MODE >
ANI22 Response:
< REP AUDIO_SUMMING_MODE OFF >
< REP AUDIO_SUMMING_MODE 1+2 >
< REP AUDIO_SUMMING_MODE 3+4 >
Set Audio Summing Mode
Command String:
< SET AUDIO_SUMMING_MODE OFF >
< SET AUDIO_SUMMING_MODE 1+2 >
< SET AUDIO_SUMMING_MODE 3+4 >
ANI22 Response:
< REP AUDIO_SUMMING_MODE OFF >
< REP AUDIO_SUMMING_MODE 1+2 >
< REP AUDIO_SUMMING_MODE 3+4 >
Get Mic Logic Switch Out
Command String:
< GET HW_GATING_LOGIC >
ANI22 Response:
< REP HW_GATING_LOGIC ON >
< REP HW_GATING_LOGIC OFF >
Command String:
< GET CHAN_LED_IN_STATE >
ANI22 Response:
< REP CHAN_LED_IN_STATE ON >
< REP CHAN_LED_IN_STATE OFF >
Command String:
< SET CHAN_LED_IN_STATE ON >
< SET CHAN_LED_IN_STATE OFF >
ANI22 Response:
< REP CHAN_LED_IN_STATE ON >
< REP CHAN_LED_IN_STATE OFF >
Get Input Meter Display Mode
Command String:
< GET INPUT_METER_MODE >
ANI22 Response:
Set Input Meter Display Mode
Get Mic Logic LED In
Set Mic Logic LED In
Shure Incorporated
Where xx is the PEQ block 01-04. Where yy is the
PEQ filter 01-04 within the block. 00 can be used
for all blocks or all filters.
The ANI22 will respond with one of these strings.
Send one of these commands to the ANI22.
The ANI22 will respond with one of these strings.
The ANI22 will respond with one of these strings.
The ANI22 will respond with one of these strings.
Send one of these commands to the ANI22.
The ANI22 will respond with one of these strings.
The ANI22 will respond with one of these strings.
2017/10/10