Network Switch - Shure ANI22 Manual

ANI22 Audio Network Interface
sig/clip
in1
in2
out1
out2
Step 2: Access the Web Application
1. Download and install the Shure Device Discovery application (http://www.shure.com)
2. Open the Shure Device Discovery application
3. Double-click the device to open the web application.
Tip: If setting up multiple Shure devices, use the Identify button in the application to flash the lights on the device.
Select the device
Step 3: Connect Devices in Dante Controller Software
1. Download and install Dante Controller Software from http://www.audinate.com
2. Use Dante Controller to create connections with other Dante devices
Note: Refer to the Dante Controller user guide for more information on channel routing (available at http://www.audinate.com/resources/technical-documentation)
Example: Connecting the ANI22 and Shure MXA310
1. Find the MXA310 in the list of Dante transmitters, and select the plus sign (+) to show all channels.
2. Find the ANI22 in the list of Dante receivers, and select the plus sign (+) to show all channels.
3. Check the box where the MXA310 AUTOMIX OUT and the ANI22 DANTE INPUT 1 intersect
2/24
INPUT
OUTPUT
1 1
power
network
network audio
2
2
encryption
PoE
reset
ANI22

Network Switch

INPUT OUTPUT
sig/clip 1 1
in1 power
in2 network
out1 network audio
2 2
out2 encryption
PoE
reset
ANI22
Computer
Identify
MXA310
Shure Incorporated
2017/10/10