Custom Presets - Shure ANI22 Manual

ANI22 Audio Network Interface
Copy, Paste, Import, and Export Equalizer Channel Settings
These features make it simple to use effective equalizer settings from a previous installation, or simply accelerate configuration time.
Copy and Paste
Use to quickly apply the same PEQ setting across multiple channels.
1. Select the channel from the pull-down menu in the PEQ screen.
2. Select Copy
3. In the pull-down menu, select the channel to apply the PEQ setting and select Paste.
Import and Export
Use to save and load PEQ settings from a file on a computer. This is useful for creating a library of reusable configuration files on computers used for system
installation.
Export
Choose a channel to save the PEQ setting, and select Export to file.
Import
Choose a channel to load the PEQ setting, and select Import from file.
Equalizer Applications
Conferencing room acoustics vary based on room size, shape, and construction materials. Use the guidelines in following table.
EQ Application
Treble boost for improved speech intelligibility
HVAC noise reduction
Reduce flutter echoes and sibilance
Reduce hollow, resonant room sound

Custom Presets

Use presets to quickly save and recall settings. Up to 10 presets can be stored on each device to match various seating arrangements. A preset saves all device
settings except for the Device Name, IP Settings, and Passwords. Importing and exporting presets into new installations saves time and improves workflow.
When a preset is selected, the name displays above the preset menu. If changes are made, an asterisk appears next to the name.
Note: Use the default settings preset to revert to the factory configuration (excludes Device Name, IP Settings, and Passwords).
Open the presets menu to reveal preset options:
save as preset:
Saves settings to the device
load preset:
Opens a configuration from the device
import from file:
Downloads a preset file from a computer onto the device. Files may be selected through the browser or dragged into the import window.
export to file:
Saves a preset file from the device onto a computer
14/24
Suggested Settings
Add a high shelf filter to boost frequencies greater than 1 kHz by 3-6 dB
Add a low cut filter to attenuate frequencies below 200 Hz
Identify the specific frequency range that "excites" the room:
Set a narrow Q value
Increase the gain to between +10 and +15 dB, and then experiment with
frequencies between 1 kHz and 6 kHz to pinpoint the range of flutter echoes
or sibilance
Reduce the gain at the identified frequency (start between -3 and -6 dB) to
minimize the unwanted room sound
Identify the specific frequency range that "excites" the room:
Set a narrow Q value
Increase the gain to between +10 and +15 dB, and then experiment with
frequencies between 300 Hz and 900 Hz to pinpoint the resonant frequency
Reduce the gain at the identified frequency (start between -3 and -6 dB) to
minimize the unwanted room sound
Shure Incorporated
1.
2.
3.
1.
2.
3.
2017/10/10