Installation And Commissioning - Siemens 7XV5654-0BA00 Directions For Use Manual

7XV5654-0BA00

Installation and Commissioning

Reference to Installation
The devices are permitted only for operation within enclosed housings or cabinets and
places of installation are to be accessible only for qualified personnel.
The device is clipped on a 35 mm top-DIN rail (according to EN50022).
The installation location should be free of vibrations. The admissible temperature
(operation or functional temperature) is to be observed (see technical data).
Disregard of the temperature range required for proper function may cause malfunction,
failure or destruction of the device.
C53000-B1175-C168-1
Warning
When operating electrical devices, certain parts are necessarily
under dangerous voltage. Therefore, disregard of the operating
notes may cause severe bodily injury or property damage.
Installation and electrical connection of the device should be
performed by adequately qualified personnel only. In particular,
all warnings must be strictly observed.
Do not look directly into FO-transmitter diodes, if you wear optical
aid (glasses, contact lens).
Warning
For enviroment temperatures over 60°C the device must be
protected against unintentional contacts through a shielding. The
loss of heat may not impared. If the device is DIN rail mounted
the minimum distance to other devices must be 50 mm.
English
59 / 69