English
Commissioning
Check if the operating data correspond to the values stated on the rating plate. Do not
modify the Sync-Transceiver in any way.
Snap the mounting device of the Sync-Transceiver onto a rail.
Connect the Sync signal to terminals "Sync-Output +" and "Sync-Output -".
Connect the FO channel to the optical input
lock).
Connect the power supply to terminals + L and - L.
Do not energize the power supply of the Sync-Transceiver until the Sync signal and the
desired signal outputs are connected.
The Sync-Transceiver is ready to operate as soon as the power supply is energized.
32
Sync-Transceiver
using the ST connector (bayonet
E50417-K1074-C294-A2