Location Of The Connection Points - Siemens 7XV5654-0BA00 Directions For Use Manual

7XV5654-0BA00

Location of the connection points

Fig. 12: Location of the connection points
Screw terminals X2, X5
Connection
X2
X7
Tab. 1: Screw terminals X2, X7
Fiber optic connectors R1 und R2
The fiber optic inputs (receivers) are signed as R1 and R2 (see Fig. 4).
Please note: The ST plugs are to be shifted with the lateral nose into the groove of the
device connection and locked afterwards through a short right turning. During the
installation of the FO - cables the bending radius specified for the cable is to be kept.
C53000-B1175-C168-1
Meaning
Power supply U
H
Alarm contact M1
R1/R2: Fiber optic inputs (ST)
X1: Two 24 V outputs at a
9 pol. Sub-D socket
X2: Terminals for the auxiliary
voltage (power supply)
X7: Alarm contact
X5: Binary input
X6: Sync-output with electronic
relay contact
DC: L+
DC: L-
English
Symbol
AC: L
AC: N
1, 2
55 / 69