Mix Elements (Ring Modulator) - Horst MIDI Wave-Theremin MWT-01 Manual

MIX elements (ring modulator):

Pitch: (ring modulator input)
P1: Raw Oscillator 1 (triangle)
P2: Raw Oscillator 2 ( square)
P3: Raw Oscillator 3 ( needle)
Volume: (ring modulator input)
P1: Volume Raw Osc 1 (0 to max, 0 = off)
P2: Volume Raw Osc 2 (0 to max, 0 = off)
P3: Volume Raw Osc 3 (0 to max, 0 = off)
Pan: (ring modulator output/carrier wave)
P1: Pan sine (left to right)
P2: Pan triangle (left to right)
P3: Pan square (left to right)
Tone: (ring modulator output/carrier wave)
P1: level sine (0 to max)
P2: level triangle (0 to max)
P3: level square (0 to max)
Control: (fade position, now controlling ring modulator parameters)
P1: ring modulator octave skip for carrier frequency
P2: ring modulator pitch adjust for carrier frequency (zero for max. range)
P3: Raw oscillator(s) pitch shift
27