Overview Of Instrument Selection Elements - Horst MIDI Wave-Theremin MWT-01 Manual

Overview of Instrument Selection elements:

(1 ... 8) Wave Select: (all waves up to 3 voices/oscillators at a time)
(1) Preset 1
(2) Preset 2
(3) Preset 3
(4) Sine
(5) Triangle
(6) Rectified Sine
(7) Saw tooth
(8) Square
The Oscillators can be setup/mixed using pitch, vol, pan, tone and fade from
the MIX section.
(9 ... 10) Resonant Filter: (up to 3 internal generators, 1 external input)
Theremin functions as a signal-modulator. Theremin antenna controls filter
frequency.
The internal audio generators can be setup using pitch and vol from the MIX
section, similar to wave operation. The filter output (HP, BP, LP) can be
mixed together using pan and tone, to create a stereo output signal.
(11) Ring Modulator: (up to 3 internal generators, 1 external input)
Theremin functions as a signal-modulator. Theremin antenna controls ring
modulator carrier frequency.
The internal raw oscillators can be setup using pitch and vol from the MIX
section, similar to wave operation. The ring modulator output (sine, triangle,
square) can be mixed together using pan and tone, to create a stereo output
signal.
(12) Setup:
Global setup / save and recall, antenna response etc...
23