Table of Contents
Advertisement
Setting up the Theremin:
The Theremin can be customized to suite your preferences.
To enter the (global) setup mode, point the Instrument-Selector to position
'SETUP'. The red status LED should now be flashing fast. From here you
can initiate another Auto-tune, save and recall settings etc...
Initiate Auto Tune: Set the mode selector to
trigger button. Wait for tuning to complete. Check the tuning. You may also
temporarily adjust the
Adjust Antenna Range: The playing range of the Theremin can be
adjusted. Set the mode selector to
button. Adjust the overall playing
parameter P2. Adjust parameter P3 to change the
to the antenna. You may also temporarily adjust the
like.
Tune A440: The Theremin can be calibrated to 440 Hz. This may be useful
when trying to align MIDI pitch to the analog Theremin output. Set the
mode selector to
'tune A440'
frequency
'A440-tune'
the
'volume'
with P1 if you like.
with P1 if you like.
'volume'
'Antenna-range'
'far-distance'
(pitch) and push the trigger button. Adjust the
with parameter P2. You may also temporarily adjust
'Auto-Tune'
and push the
and push the trigger
(to the antenna) with
'antenna-mute'
'volume'
with P1 if you
distance
20
Advertisement
Table of Contents
