Mix Elements (Resonance, Noise) - Horst MIDI Wave-Theremin MWT-01 Manual

MIX elements (resonance, noise):

Pitch: (filter input)
P1: Raw Oscillator 1 (saw tooth)
P2: Raw Oscillator 2 ( square)
P3: Raw Oscillator 3 ( needle)
Volume: (filter input)
P1: Volume Raw Osc 1 (0 to max, 0 = off)
P2: Volume Raw Osc 2 (0 to max, 0 = off)
P3: Volume Raw Osc 3 (0 to max, 0 = off)
Pan: (filter output)
P1: Pan HP (left to right)
P2: Pan BP (left to right)
P3: Pan LP (left to right)
Tone: (filter output)
P1: level HP (0 to max)
P2: level BP (0 to max)
P3: level LP (0 to max)
Control: (fade position, now controlling filter parameters)
P1: Filter gain
P2: Filter resonance
P3: Raw oscillator(s) pitch shift
26