Installing The Chassis Frame - Dell Latitude 5491 Service Manual

Hide thumbs Also See for Latitude 5491:
Table of Contents

Advertisement

Available languages

Available languages

4
To remove the chassis frame:
a
Remove the five (M2x3) screws and eight (M2x5) screws that secure the chassis frame to the system [1].
b Lift the chassis frame from the system [2].

Installing the chassis frame

1
Place the chassis frame into the slot on the system.
NOTE:
Gently pull the keyboard cable and keyboard back light cables through the spacing in the chassis frame before
placing the chassis frame in the slot on the system.
2
Replace the five (M2x3) screws and eight (M2x5) screws to secure the chassis frame to the system.
3
Connect the keyboard cable and the keyboard backlight cable to their connectors on the system.
NOTE:
There may be more than one cable to connect based on keyboard types.
4
Route the WLAN and WWAN (optional) cables through the routing channels.
5
Install the:
a
WWAN card (optional)
b
WLAN card
c
SSD frame
d
SSD card
e
hard drive
f
battery
g
base cover
6
Follow the procedure in
After working inside your
system.
Szétszerelés és újbóli összeszerelés
35

Advertisement

Table of Contents
loading

Table of Contents