Bartscher 420/20L Manual
Hide thumbs Also See for 420/20L:

Advertisement

Quick Links

420/20L
300746
Original-Gebrauchsanleitung
V1/1018

Advertisement

Table of Contents
loading

Summary of Contents for Bartscher 420/20L

  • Page 1 420/20L 300746 Original-Gebrauchsanleitung V1/1018...
  • Page 2: Table Of Contents

    5.4.1 Functions of control buttons / indicators ............45 5.4.2 Vacuum packaging ..................48 6. Cleaning ........................53 7. Possible Malfunctions ..................... 54 8. Waste disposal ......................56 Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...
  • Page 3: Safety

    Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
  • Page 4: Safety Instructions

    WARNING of hand injury! This symbol highlights dangerous situations which could lead to serious hand injury. CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
  • Page 5  Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard!  Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. ...
  • Page 6  Check the power cord regularly for damage. Do not use the device if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. ...
  • Page 7: Use As Intended

    WARNING! Burn hazard! In order to avoid this risk, please observe the following safety instructions.  During the operation and shortly after, the sealing strip and sealing bar are hot. Do not touch these parts of the device.  Operate the device only using the designated handles and control elements.
  • Page 8: General Information

    2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
  • Page 9: Transport, Packaging And Storage

    3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
  • Page 10: Technical Data

    4. Technical data 4.1 Technical specification Name Vacuum packaging machine 420/20L 300746 Code- No.: Stainless steel, plastic Material: Silver, black Colour:  Functions: - combined vacuuming and sealing - manual sealing - marinating  Vacuum control: electronic  Length of sealing strip: 420 mm ...
  • Page 11: Overview Of Parts

    4.2 Overview of parts 9 10 - 38 -...
  • Page 12: Accessories

    Description of figure on page 38 Front cover with handle Vacuum chamber ON/OFF switch Vacuum bag clamps Blade Air-suction holes Cutting rail Element for winding the power cable Rear cover Power cable Sealing bar Hose holder flap Upper + lower gasket Connecting hose holder Sealing strip 4.3 Accessories...
  • Page 13: Installation And Operation

    Vacuum bags G1,2L Capacity: 1.2 litres Dimensions: 160 x 250 mm Code-no. 300411 Vacuum bags G2,5L Capacity: 2.5 litres Dimensions: 200 x 300 mm Code-no. 300412 Vacuum bags G7,5L Capacity: 7.5 litres Dimensions: 300 x 400 mm Code-no. 300413 5. Installation and operation 5.1 Installation and connection Positioning ...
  • Page 14: The Benefits Of Vacuum Packing

    Connection DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! ...
  • Page 15: Guidelines For Vacuum Packaging

     more space is freed up in the freezer;  foodstuffs are protected from drying out and oxidation;  in this manner it is possible to marinate quickly and thoroughly (20 minutes in the vacuum is enough);  in this manner it is also possible to repack meat products, sausages, and cheeses which were previously vacuum packed (the flavour is retained);...
  • Page 16 8. Fruits and vegetables, such as apples, bananas, potatoes, and root vegetables should be peeled prior to vacuum packing, as this will prolong their shelf lives. 9. Some vegetables, such as broccoli, cauliflower, and white cabbage emit gases when vacuum packed. For this reason it is necessary to blanch and freeze them. 10.
  • Page 17 Vacuum packing for the refrigerator  The meals may be prepared earlier in appropriate portions and stored as vacuum packed in the refrigerator, and then heat as required. Vacuum packing for the food storage  The vacuum packing may also be advantageous in case of foodstuffs which may be stored in the room temperature (coffee, flour, flour products, sugar, etc.).
  • Page 18: Operation

    5.4 Operation Before the first use  Before the first use always thoroughly clean the device and its surfaces which will come into contact with food (vacuum bags, lid, etc.), according to the instructions included in Section 6 “Cleaning”. 5.4.1 Functions of control buttons / indicators A.
  • Page 19 C. PULSE Manual vacuum packaging – Pulse function: Vacuum pump sucks the air out of the vacuum bag as long as this button is pressed. You can press this button with any frequency until obtaining the desired effect. D. SEAL ONLY Sealing only: Vacuum is generated for a short time to ensure that the sealing strip and sealing bar are clean and will lay on top of each other.
  • Page 20 When the “CLOSE LID“ indicator is on, the lid is not closed. Remove handle to close the lid. When the “READY“ indicator is on, you can start the selected function. If the “COMPLETE“ indicator comes on, it means that the process has been completed.
  • Page 21: Vacuum Packaging

    5.4.2 Vacuum packaging Important advice and tips  Do not leave too much air in the vacuum bag. Before sealing the vacuum bag, squeeze out as much air as possible from the bag. With too much air in the vacuum bag, the load on the vacuum pump may increase so much that the motor will not have enough power to suck all air out of the bag.
  • Page 22  Make sure that the blade is at one of the ends (right or left) of the cutting rail.  Extend the foil roll to the required length and place on the cutting rail.  Move the blade from one end to another in order to accurately and cleanly cut off the vacuum bag.
  • Page 23 Vacuum packaging using vacuum bags  Place the food product to be packed in the vacuum bag.  Clean the open end of the vacuum bag and make sure there is no food or liquid residues on it.  Always place an open end of the vacuum bag flat and evenly spread on the sealing strip in the area of vacuum packaging, do not fold or bend the vacuum bag.
  • Page 24 Vacuum packaging in vacuum bag with “Manual vacuum packaging” function / PULSE  This function is used for packing delicate food products (such as tomatoes, chips and similar products), using low vacuum.  Place the food product to be packed in the vacuum bag. ...
  • Page 25  The device stops automatically when the sufficient vacuum has been reached in the vacuum container. The vacuum packaging process is finished.  Close the lid lock and disconnect the connecting hose from the lid of the vacuum container and from the device. ...
  • Page 26: Cleaning

    6. Cleaning WARNING! Before cleaning, switch the device off using the ON/OFF switch and disconnect it from the power supply (pull the plug!). The device is not suited for direct washing via water jets. Protect the device from the water penetration. o Do not use any sharp metallic tools (e.g.
  • Page 27: Possible Malfunctions

    Storing the device o If the device is not used for a long time, clean it according to the above description and store in a dry, clean place, protected against cold, sun and, children. Do not place any heavy objects on the device. 7.
  • Page 28 Problem Possible cause and solution The sealing may be incomplete due to folds, crumbs, fat, or moisture. Reopen the vacuum packing bag, clean the upper part of its interior, remove all foreign objects from the sealing strip, and repeat the sealing operation. The vacuum bag Check the bag for damages which may cause the vacuum loses vacuum after...
  • Page 29: Waste Disposal

    Electric devices should be used and disposed of properly to prevent the impact on the environment.  Disconnect the device from the power supply and remove the power cord from the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...

Table of Contents