General Scpi Commands; Idn; Help; Simulation Subsystem - Jackson Labs RSR GNSS Transcoder User Manual

RSR GNSS Transcoder™ User Manual
As a Quick-Start, the user may want to try sending the following commands to the unit:
sim?
syst:stat?

help?

gps?
ptim?
sync?

4.2 General SCPI Commands

4.2.1 *IDN?

This query outputs an identifying string. The response will typically show the following information:
<company name>, <model number>, <serial number>, <firmware revision>
4.2.2 HELP?
This query returns a list of the commands available for the RSR GNSS Transcoder™.

4.3 Simulation Subsystem

The Simulation subsystem groups all of the commands associated with controlling the simulation
and transcoding features. The list of commands supported is the following:
SIMulation:MODE <AUTO|MANUAL|SIM|TRANSCODE>
SIMulation:STATe?
SIMulation:HOLDover:MODE <ON|OFF|LIMIT>
SIMulation:HOLDover:STATe?
SIMulation:HOLDover:LIMIT [5,86400]
SIMulation:HOLDover:INDicate <SV32 | HIGHEST | OFF>
SIMulation:POSition?
SIMulation:POSition:LLH <lat,long,alt>
SIMulation:POSition:ECEF <x,y,z>
SIMulation:POSition:FILTer?
SIMulation:POSition:FILTer:MODE <OFF|DYNAMIC|INS>
SIMulation:POSition:FILTer:LLH?
SIMulation:POSition:FILTer:ECEF?
SIMulation:POSition:FILTer:VMAX <1.0,600.0>
40 © 2017 Jackson Labs Technologies, Inc.