14Csac:sn; 15Csac:lifetime; 16Csac:steer:latch Once; 17Csac - Jackson Labs RSR GNSS Transcoder User Manual

4.15.14 CSAC:SN?
This query returns the Serial Number of the CSAC in the form YYMMCSNNNNN where YYMM is
the year and month of production and NNNNN is the serialized unit of that month.
4.15.15 CSAC:LIFEtime?
This query returns the accumulated number of hours that the CSAC has been powered on since the
last factory reset of the RSR GNSS Transcoder™ board. The value is stored in the external NVRAM
and updated every hour when the CSAC is powered on.
4.15.16 CSAC:STeer:LATch ONCE
This command stores the momentary steering offset into the CSAC internal NVRAM. This is done
automatically by the firmware once every 24 hours, so as not to damage the CSAC NVRAM which
has a limited number of write cycles. The user may force this value to be stored into the CSAC by
issuing the CSAC:STeer:LATch ONCE command
4.15.17 CSAC?
This query displays all the CSAC queries defined above.
© 2017 Jackson Labs Technologies, Inc.
RSR GNSS Transcoder™ User Manual
99