Installation; Unpacking - Zanussi ZWH71046 User Manual

11.

INSTALLATION

11.1 Unpacking

CAUTION!
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if
the machine ever has to be
transported again.
1. Use gloves. Cut and remove four cut
out straps as shown.
2. Remove the carton box. Remove the
polystyrene packaging materials.
Remove the plastic bag which cover
the machine.
3. Open the door. Remove the polysty-
rene piece from the door seal and all
the items from the drum.
Put one of the polystyrene «A»
4.
packaging elements on the floor
behind the appliance. Carefully put
down the appliance with the rear side
on it. Make sure not to damage the
hoses.
X4
5. Remove the polystyrene base.
6. Pull up the appliance in vertical
position.
7. Remove the power supply cable and
the drain and inlet hoses from the
hose holders «B» on the rear of the
appliance.
«A»
ENGLISH 29