Advertisement
INSTALLATION
UNPACKING
Remove the cardboard packing, reinforcing angle pieces and polythene, wrapping
and proceed as follows:
1)
Tilt the machine and remove base packing (fig. 1)
2)
Remove the 6 top panel securing screws and lift panel clear (fig. 2)
3)
Remove the bracket (A - fig. 3) which secures the tub to the back of the
appliance.
4)
Remove the 4 screws which secure the transit crosspiece to the cabinet
(B - fig. 3) remove the crosspiece and lift out the two polystyrene packing
blocks (C - fig. 3).
5)
Replace the top panel and the 6 securing screws.
LEVELLING
Move the washing machine to its permanent operating position and carefully level
it by adjusting the feet, locking them in position with the lock nut (A - fig. 4).
4
Advertisement
