Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWH 7100 P
Summary of Contents for Zanussi ZWH 7100 P
- Page 1 User manual Washing Machine ZWH 7100 P ZWH 7120 P...
-
Page 2: Table Of Contents
• If the appliance has a child safety device, we recommend you ac- tivate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. www.zanussi.com... -
Page 3: Safety Instructions
• Adjust the feet to have the necessary space between the appliance and the carpet. Water connection • Make sure not to cause damage to the water Electrical connection hoses. Warning! Risk of fire and electrical shock. www.zanussi.com... -
Page 4: Frost Precaution
When you intend to start the appliance up 4. unscrew the drain hose from the rear sup- again, make sure that the room temperature is port and unhook it from sink or spigot; above 0°C. 5. place a bowl on the floor; www.zanussi.com... -
Page 5: Environment Concerns
The materials marked with the symbol • Measure out detergent according to the wa- recyclable. ter hardness, the degree of soiling and the >PE<=polyethylene quantity of laundry being washed. >PS<=polystyrene Product description www.zanussi.com... -
Page 6: Technical Data
Water supply pressure Minimum 0,05 MPa Maximum 0,8 MPa Maximum Load Cotton 7 kg Spin Speed Maximum 1000 rpm (ZWH 7100P) 1200 rpm (ZWH 7120P) Installation Unpacking • Read carefully the "Safety information" chapter before installing the appliance. Warning! www.zanussi.com... - Page 7 • Remove the power supply cable and the draining and inlet hose from the hose hold- ers on the rear of the appliance. • Remove the cardboard top. • Remove the polystyrene packaging materi- als. www.zanussi.com...
- Page 8 • Slide out the relevant plastic spacers. Warning! Do Positioning and levelling not remove the drain hose from the rear sup- port. Remove this hose only if it is necessary to drain the water. Refer to "Frost precaution" and "What to do if". www.zanussi.com...
- Page 9 Connect the hose to a tap with a 3/4” thread. Tie the plastic hose guide to the tap with a string to prevent that the drain hose unhooks when the appliance is emptying. • Onto a sink outlet spigot. 35° 45° www.zanussi.com...
- Page 10 • Make sure that the electrical information on extension cables. There is a risk of fire. the rating plate agree with your domestic power supply. • Do not replace or modify the mains cable yourself. Contact the After Sales Service. www.zanussi.com...
-
Page 11: Special Accessories
2. After pressing button 8: it will be impossi- tic signal is deactiva- ble to change any other programme or op- ted (except if there is tion. a fault). By pressing these 2 buttons again, the acoustic signal is reactivated. www.zanussi.com... -
Page 12: Daily Use
• Wash the socks and the gloves inside the Tar stains: first treat with stain remover, me- bag or a net. thylated spirits or benzine, then rub with deter- Remove stubborn stains before washing: gent paste. 1) do not use acetone on artificial silk. www.zanussi.com... - Page 13 The choice of detergent will depend on the phase among washing items into the drum. type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and de- gree of soiling. www.zanussi.com...
- Page 14 • With programmes with prewash. • Do not use liquid detergent if the washing • Carefully put the programme doesn't start immediately. drawer back. In all above listed cases, use the flap in "UP" position . www.zanussi.com...
- Page 15 When an option button is selected, the corresponding pilot light is on. Otherwise it is off. For compatibility among washing programmes and options, see the "Washing Pro- grammes". If an incorrect option is selected, the integrated red pilot light of the button 8 flashes 3 times and the display shows the message Err. www.zanussi.com...
- Page 16 By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water. To empty out the water, please read the paragraph «At the end of the programme». www.zanussi.com...
- Page 17 The delay time value decreases by one unit every hour and then, when 1 hour remains, every minute. • Alarm codes In the event of operating problems, some alarm codes can be displayed, for example (see paragraph «What to do if...»). www.zanussi.com...
- Page 18 PAUSE by pressing button 8 and wait a few minutes before opening the door. After you have closed the door, press the same button again. The Delay Start cannot be selected with the draining programme. www.zanussi.com...
- Page 19 Follow the below instructions to empty out the the drum is empty. If you do not intend to carry water: out another wash, close the water tap. Leave www.zanussi.com...
-
Page 20: Washing Programmes
Main wash - Rinses - Maximum spin speed at: 1000 rpm for SUPER QUICK model ZWH 7100P; 1200 rpm for model ZWH 7120P EXTRA RINSE, Max. load 3,5 kg - Reduced load 2 kg DELAY START Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses . Normally soiled items. www.zanussi.com... - Page 21 To rinse and spin cotton garments which have been washed by hand. Select the EXTRA RINSE option to intensify the rins- ing action. The appliance adds additional rinses. DRAIN Draining of water For emptying out the water left in the drum. www.zanussi.com...
- Page 22 According to regulation 1061/2010, these programmes are respectively the «Standard 60 °C cotton programme» and the «Standard 40 °C cotton programme». They are the most efficient programmes in terms of combined energy and water consumptions for washing normally soiled cotton laundry. www.zanussi.com...
-
Page 23: Consumption Values
• Select the hottest cotton wash programme. Maintenance Wash • Use a normal measure of detergent, must be With the use of low temperature washes it is a powder with biological properties. possible to get a build up of residues inside the drum. www.zanussi.com... - Page 24 • Use the previous brush to clean the recess, ensuring that upper and lower part of it is well cleaned. • remove the filter and clean it under the tap; After having cleaned the dispenser and the drawer recess, replace it. www.zanussi.com...
-
Page 25: What To Do If
Before contacting your local Service Centre, scribed in the charts, without calling out an en- please carry out the checks listed below. gineer. During appliance operation it is possible that the red pilot light of the button 8 flashes, the www.zanussi.com... - Page 26 The door has not been closed or is not closed properly. • Close firmly the door. Door open The appliance does not start or stops during Before contacting your local Service Centre, operation without any visible alarm. please carry out the checks listed below. www.zanussi.com...
- Page 27 The appliance is not levelled correctly. The appliance vibrates • Adjust the feet. noisily: The laundry is not evenly distributed in the drum. • Redistribute the laundry. Maybe there is very little laundry in the drum. • Load more laundry. www.zanussi.com...
- Page 28 If the malfunction shows again, contact your Service Centre. The necessary data for the Model description (MOD.) ....... Product number (PNC) ........Serial number (S.N.) ........Mod..Prod. No..Ser. No..www.zanussi.com...
- Page 29 www.zanussi.com...
- Page 30 www.zanussi.com...
- Page 31 www.zanussi.com...
- Page 32 www.zanussi.com/shop...