MK-1280 ELECTRIC SAW
(D)
Install Retaining Screw and
Outer Flange.
CAUTION
Diamond Blades improperly used are dangerous. Comply with American National Standards Institute
Safety Code, B7.1 and, Occupational Safety and Health Act covering Speed, Safety Guards, Flanges,
Mounting Procedures, General Operating Rules, Handling, Storage and General Machine Conditions.
PRE-START INSPECTION
The pre-start inspection should be performed before beginning any job.
If the Diamond Blade shows signs of fatigue cracking, replace the blade before
CAUTION
starting work.
(A)
Inspect Blade for damage –
Verify Blade correct for material
being cut.
(D)
Inspect MK-1280 Electric Saw for
general damage, loose connec-
tions and hardware.
(E)
Tighten retaining screw and
Outer Flange. Reverse process
to install.
(B)
Inspect Wooden Strip for
excessive grooves.
20
ASSEMBLY
(F)
Install Blade Guard and tighten
bolts.
(C)
Verify Movable Cutting Table
moves freely and inspect engine.