Hussmann RL2W Installation & Operation Manual page 2

ii
This equipment uses a flammable refrigerant. Installation, service and repair should be done only by qualified
and trained technicians in accordance with this manual.
If a leak is detected, follow store safety procedures. It is the store's responsibility to have a written safety
procedures in place. The safety procedure must comply with all applicable codes such as local fire department's codes.
At minimum, the following actions are required:
• Immediately evacuate all persons from the store, and contact the local fire department to advise them that a
propane leak has occurred.
• Call Hussmann and/or a qualified service agent and inform them that a propane sensor has detected the
presence of propane.
• Do not let any persons back into the store until the qualified service technician has arrived and that
technician advises that it is safe to return to the store.
• The propane gas used in the unit has no odor. The lack of smell does not indicate a lack of escaped gas.
• A hand-held propane leak detector ("sniffer") should be used before any repair and/or maintenance is
attempted. All repair parts must be identical models to the ones they are replacing.
• No open flames, cigarettes or other possible sources of ignition should be used inside the building where
the units are located until the qualified service technician and/or local fire department determines that all
propane has been cleared from the area and from the refrigeration systems.
P/N 3053328_C
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM