• Remove the batteries from the device if you will not be using the device for a longer period of time. • Never short-circuit the supply terminal in the battery compartment! dew point scanner BP25...
To prevent damages to the device, do not expose it to Do not look directly into the laser beam or the extreme temperatures, extreme humidity or moisture. opening from which the laser beam emerges! Notice Do not use abrasive cleaners or solvents to clean the device. dew point scanner BP25...
Consequently, it is a mere aiming aid and not intended for the actual temperature measurement. The smaller the measuring spot, the more precise is the measured result. dew point scanner BP25...
HOLD mode. Emissivity indication Indicates the preset emissivity Scope of delivery Measurement value Indicates dew point • 1 x Dew point scanner BP25 (without battery) display 2 temperature, ambient temperature or relative humidity • 1 x Device bag Alarm sound indication Alarm sound: •...
ATTENTION: Risk of cover (21) with your fingers. condensation forming! 2. Use the battery clip (22) to connect the new battery with correct polarity. 3. Insert the battery in the battery compartment. 4. Close the cover of the battery compartment. dew point scanner BP25...
Page 7
ð The laser is switched off. 1. Press and hold the Measurement button (3) for approx. ð The Laser indication (11) disappears. 3 seconds in any measuring mode. ð The device switches off. Info The device memorizes the selected setting when switching off. dew point scanner BP25...
According to Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended) and the Waste Batteries and Accumulators Regulations 2009 (SI 2009/890) (as amended), devices that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. dew point scanner BP25...
Need help?
Do you have a question about the BP25 and is the answer not in the manual?
Questions and answers