Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BA16WP
Summary of Contents for Trotec BA16WP
- Page 1 BA16WP OPERATING MANUAL VANE ANEMOMETER CONTROLLED VIA SMARTPHONE...
-
Page 2: Table Of Contents
Keep all safety signs, stickers and labels in legible condition. • Do not open the device. • Observe the storage and operating conditions as given in the Technical data chapter. vane anemometer controlled via smartphone BA16WP... - Page 3 Risk of suffocation! the technical data. Do not leave the packaging lying around. Children may The Trotec MultiMeasure Mobile app on the terminal device is use it as a dangerous toy. used for both operation and the evaluation of the measured values.
-
Page 4: Information About The Device
Information about the device Parameter Value Device description Model BA16WP Used in combination with Trotec's MultiMeasure Mobile app the Air flow rate vane anemometer permits measurements of air velocity, Measuring range 0.6 m/s to 30 m/s volumetric flow, air temperature and relative humidity. -
Page 5: Transport And Storage
• dry and protected from frost and heat • protected from dust and direct sunlight • The storage temperature is the same as the range given in the Technical data chapter. • Remove the batteries from the device. vane anemometer controlled via smartphone BA16WP... - Page 6 Install the Trotec MultiMeasure Mobile app on the terminal ü The Bluetooth function on your terminal device is activated. device you want to use in combination with the appSensor. 1. Start the Trotec MultiMeasure Mobile app on the terminal Info device.
- Page 7 Indicates the temperature as indication as measured over the course of time. graphic display Volumetric flow Indicates the volumetric flow as indication as calculated over the course of time graphic display (after having entered the area). vane anemometer controlled via smartphone BA16WP...
- Page 8 Enter area / volumetric flow: Tap on the field an enter the cross-sectional area. Then the calculated value for the current volumetric flow will be displayed. 19 Refresh Performs an individual measurement and measured refreshes the displays (17) and (18). value button vane anemometer controlled via smartphone BA16WP...
- Page 9 24 Continue button Resumes the recording of the 20 REC button Opens the sensor settings menu. measured values without saving. 21 Stop recording Stops the current recording of button measured values. Opens the submenu for saving recordings. vane anemometer controlled via smartphone BA16WP...
- Page 10 Evaluation parameters. They will not be added to the already saved measurement, to be sure, but if you save the measurement again with a different name, these parameters will be added to the initial measurement. vane anemometer controlled via smartphone BA16WP...
- Page 11 Generating a report App settings The reports generated in the MultiMeasure Mobile app are short Proceed as follows to make settings in the Trotec MultiMeasure reports providing a fast and simple documentation. Proceed as Mobile app: follows to generate a new report: 1.
-
Page 12: Maintenance And Repair
ð The appSensor is switched off. menu item Settings => Help. Selecting the menu item Help 2. You may now exit the Trotec MultiMeasure Mobile app on opens a link to the app's help page. You can open a drop-down the terminal device. -
Page 13: Disposal
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. vane anemometer controlled via smartphone BA16WP... - Page 14 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...