Advertisement
Quick Links
Advertisement
Related Manuals for Axis Q6010-E
Summary of Contents for Axis Q6010-E
- Page 1 Q6010-E Network Camera Repainting Instructions...
-
Page 2: Impact On Warranty
Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment. - Page 3 Clean the parts properly to remove oil, grease and dust. For more information on the materials used in the product, see its datasheet at axis.com. Powder coated parts - Use a primer. Alternatively, remove the original powder coating down to the base material, using fine sandpaper, and clean the parts before painting.
- Page 4 Q6010-E Network Camera Repaint the product Disassembly Cover ring Dome ring 1. Loosen the four screws and remove the cover ring. 2. Remove the four screws from the cover ring. 3. Slowly lift the inner edge of the dome ring. Be careful not to scratch or dent the dome ring.
- Page 5 Q6010-E Network Camera Repaint the product Repainting 1. Mask the dome ring including the edge. 2. Place the dome ring on the camera unit. Make sure the edge of the top cover can be painted. 3. Mask the holder hook and all holes.
- Page 6 Q6010-E Network Camera Repaint the product 5. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer. 6. Let the paint dry. 7. To get a better coverage and clearer color, apply a second layer of spray paint.
- Page 7 Q6010-E Network Camera Repaint the product Reassembly 2.0 N m (1.48 lb ft) 1. Reassemble the dome ring. 2. Reassemble the cover ring (4 screws).
- Page 8 Repainting Instructions Ver. M1.5 Q6010-E Network Camera Date: July 2020 © Axis Communications AB, 2020 Part No. T10154781...