Specifications; Setup; Installation And Connections - WinSystems SYS-ITX-N-3800 Product Manual

6.

Specifications

7.

Setup

7.1

Installation and Connections

v1.0
The SYS-ITX-N-3800 adheres to the following specifications and
requirements.
V
CC
MTBF
Battery: CR-2032
Mechanical
Dimensions
Weight
Temperature
Humidity (RH)
RoHS Compliant
Runs 32/64-bit Windows, Linux, and other x86-compatible operating systems.
CPU Type
BIOS
Memory
VGA Card
LAN Card
LAN Card
Audio Card
Use the information in this section to install the SYS-ITX-N-3800. Refer to
"Configuration" on page 13 to locate and identify the connectors outlined
in this section.
1. Connect a compatible monitor to the VGA output (J8) or the
DisplayPort (J3).
www.winsystems.com
Electrical
12 V DC ±5%, 15 watts (maximum)
14.5 years
Chemical System: Li/MnO
Nominal Voltage: 3 V
Rated Capacity: 225 mAh
Mechanical
5.9 x 5.9 x 2.1 in. (150 x 150 x 53 mm)
2.86 lb. (1.30 kg)
Environmental
-25°C to +60°C (-13°F to +140°F)
5% to 95% non-condensing
Yes
Operating Systems
Chipsets and Drivers
Intel Atom CPU
E3845: 1.91 GHz L2 cache 2048 KB
E3827: 1.75 GHz L2 cache 1024 KB
Phoenix BIOS SYS-ITX-N-3800
DDR3L SO-DIMM 1333 1.35 V
On-board Intel HD graphics
On-board Intel I210 gigabit network connection
On-board Intel I210 gigabit network connection #2
On-board Realtek ALC892 high definition audio
SYS-ITX-N-3800/Specifications
2
Page 9