Table of Contents
Advertisement
Boot
v1.0
Menu item
Set User Password Press Enter to set or clear the user password.
Press Esc to exit without making changes.
User Hint String
Press Enter to type a hint for the user
password. If you forget your password, the
hint may help you remember the password.
Min. password
Sets the minimum number of characters for
length
your password.
Authenticate User
Enables/disables user authentication prompt
on Boot
on boot.
NOTE: This option is available when the
supervisor password is set.
HDD Security
(Read only) If no hard disk drive is detected,
Status
this is blank.
No HDD Detected
(Read only) This is displayed when no hard disk
drive is detected.
Trusted Platform Module (TPM)
TPM Not Detected (Read only) The TPM variable current state.
On the Boot menu, the Boot Priority Order settings change the boot order
for devices, enable/disable devices, and delete unprotected devices.
Press the up and down arrow keys to select (highlight) a device. use the
+ and - keys to move a selected device up or down. Pressing Shift + 1
enables or disables a device (toggles its state). Pressing the Del key deletes
an unprotected selected device.
www.winsystems.com
Description
SYS-ITX-N-3800/BIOS Settings
Choices
Default
1-20
1
Enable,
Disable
Disable
—
—
—
Page 31
Advertisement
Table of Contents
