Table of Contents
Advertisement
1.
Before You Begin
1.1
Warnings
2.
Introduction
3.
Functionality
v1.0
Review the warnings in this section and the best practice
recommendations (see "Best Practices" on page 35) when using and
handling the WINSYSTEMS SYS-ITX-N-3800 embedded computer.
Adherence to these recommendations provides an optimal user
experience and prevents damage. Read through this document and
become familiar with the SYS-ITX-N-3800 before proceeding.
FAILING TO COMPLY WITH THESE BEST PRACTICES MAY DAMAGE THE
SYS-ITX-N-3800 AND VOID YOUR WARRANTY.
Only qualified personnel should configure and install the SYS-ITX-N-3800.
While observing best practices, pay particular attention to the following:.
Avoid Electrostatic Discharge (ESD)
Only handle the circuit board and other bare electronics when electrostatic
discharge (ESD) protection is in place. Having a wrist strap and a fully grounded
workstation is the minimum ESD protection required before the ESD seal on
the product bag is broken.
Warning
Do not reverse the positive and negative terminals when you connect power to
the unit. This voids the warranty and damages the embedded computer.
This manual provides configuration and usage information for the SYS-
ITX-N-3800. If you still have questions, contact Technical Support at (817)
274-7553, Monday through Friday, between 8 AM and 5 PM Central
Standard Time (CST).
Refer to the WINSYSTEMS website at
other accessories (including cable drawings and pinouts) that can be used
with your SYS-ITX-N-3800.
The SYS-ITX-N-3800 is an industrial NANO-ITX embedded computer. Its
compact design and low power dissipation board is ideal for digital
signage, digital security surveillance (DSS), medical, and industrial IoT
applications. The processor for the unit is an Intel
www.winsystems.com
SYS-ITX-N-3800/Before You Begin
https://www.winsystems.com/
®
E3800 series Atom™,
for
Page 5
Advertisement
Table of Contents
