WinSystems SYS-ITX-N-3800 Product Manual page 24

v1.0
System Information
System Information parameters provide information and vary with BIOS
version and the specific modules used. The typical format of the
information is provided instead of the actual default setting or value.
Menu item
BIOS Version
BIOS Build Date
EC Version
EC Build Date
Processor Type
System Memory Speed
L2 Cache Speed
Total Memory
Boot Features
Menu item
NumLock Selects the default state for NumLock during power
up.
Timeout Number of seconds that Power On Self Test (POST)
waits for user input before booting.
Quick Boot Enables/disables quick boot.
Diagnostic Splash Enables/disables the diagnostic splash screen during
Screen boot.
Diagnostic Enables/disables the diagnostic summary screen
Summary Screen display during boot.
BIOS Level USB Enables/disables all BIOS support for USB (boot time
is reduced if USB support is not needed and
disabled).
NOTE: This prevents using a USB keyboard in setup
or a USB biometric scanner such as a
fingerprint reader to control access to setup,
but does not prevent the operating system
from supporting such hardware.
Console Enables/disables Universal Console Redirection
Redirection
Allow Hotkey in S4 Enables/disables hotkey detection when the system
Resume resumes from the hibernate state.
UEFI Boot Enables/disables the Unified Extensible Firmware
Interface (UEFI). The UEFI interfaces between the OS
and firmware.
Error Manager
Error Manager log information. From this screen you can view and clear
the Error Manager log.
www.winsystems.com
Description
Value format: yymmdd
Value format: mm/dd/yyyy
Value format: ymmddTXX
Value format: mm/dd/yyyy
Value: Intel Atom CPU E3800 series
Value: 1066 MHz or 1333 MHz
Value: 512 KB per core
Value: Up to 8192 MB
Description
SYS-ITX-N-3800/BIOS Settings
Choices Default
On, Off On
2
Enable, Disable
Disable
Enable, Disable
Disable
Enable, Disable
Disable
Enable, Enable
Disable
Enable, Disable
Disable
Enable, Enable
Disable
Enable, Enable
Disable
Page 24