Table of Contents
Advertisement
Exit
10. Troubleshooting
10.1 BIOS settings
v1.0
Menu item
Exit Saving Changes
Saves all changes, exits setup, and restarts the system (this is the same
functionality as F10).
Exit Discarding
Exits setup without changes.
Changes
Load Setup Defaults
Loads standard default values (this is the same functionality as F9).
Discard Changes
Loads the original values of this boot time, not the default setup values.
Save Changes
Saves all changes on all menus, but does not restart the system.
This section provides useful tips to get the SYS-ITX-N-3800 operating. For
basic hardware installation and configuration, refer to "Installation and
Connections" on page 9. This section addresses system integration issues
in terms of BIOS setting and OS diagnostics.
This section assumes that you have correctly selected and connected all
devices with the required cables before applying power. If this is in
question, inspect the connection and application of each of the following
components: 204-pin DDR3 memory, keyboard, mouse, SATA hard disk,
VGA connector, power cable of the device, and all ATX accessories. Failure
of any of these components can cause a system failure.
www.winsystems.com
SYS-ITX-N-3800/Troubleshooting
Description
Page 32
Advertisement
Table of Contents
