Advertisement
Field engineering change order
Replacing the animation wheel
1.
Remove the head covers.
2.
Remove the front side covers.
3.
Remove the multimodule. See "Removing the
multimodule" on page 5.
4.
Loosen the five Torx20 screws (1).
5.
Place the framing module (2) next to the gobo and
effect module (3).
6.
Gently loosen the magnetic holder (4) with a small
flatheaded screwdriver.
7.
Replace the animation wheel (5).
NOTE! Make sure that the indexing marks (6) are
aligned.
8.
Follow the procedure reverse order.
MAC Encore Performance - How to replace the animation wheel, number 15122017,
date 15-12-2017, revision A
Figure 7: Loosening the five Torx20 screws
2
4
5
Figure 8: Placing the framing module
5
6
Figure 9: Aligning indexing marks
1
3
6
6 of 7
Advertisement
