The Original ScrapBox Ultimate Sewing Box Assembly Instructions Manual page 29

CENTER BOX SLIDING TABLE
1
For attaching rails:
1. Slide rail open, exposing 3 sections
of rail.
2. Look for black lever on smallest section.
3. Push lever up or down while removing smallest
section from the rail.
4. With the black rubber bumper of the rail at the back, install large rail sections to center box
using 4 Euro screws into pilot holes. You may have to slide rails to find the pilot holes.
2
Attach smaller rails to Center
box sliding table using 8 washer
screws.
Proprietary, patented product and assembly instructions. Do not copy or distribute.
13mm Euro Screws
Center Box
Sliding Table
Black Lever
3/4" washer screws
29