The Original ScrapBox Ultimate Sewing Box Assembly Instructions Manual page 19

CENTER BOX
4
Use Phillips Screw Driver to MANUALLY
insert (4) 1 1/2" screws into pre-drilled
screw holes on bottom side of Shelf 2
to secure Dividers.
**Shelf must be screwed into dividers
MANUALLY to avoid damaging your Ultimate SewingBox.
Next, you will use several small notions shelves as spacers
to lift top section in order to attach sides. Take a moment to locate these shelves:
5
Arrange the assembled section
as shown.
With TWO PEOPLE, Carefully lift
each corner and arrange stacks of
(3) 3 x 13" Notions Shelves under
each of the corners indicated.
Proprietary, patented product and assembly instructions. Do not copy or distribute.
x4
1 1/2"
Screws
for divider panels
x12
13 x 13" Shelves
Center Box
Lid
Center Box
Bottom
Divider
Side
Center Box
Shelf 2
Bottom Side
x o B e r n t e C
e r d v i D i
Center Box
Divider
Finished Edge
19