The Original ScrapBox Ultimate Sewing Box Assembly Instructions Manual page 14

RIGHT BOX
7
CAREFULLY Set door over 8 posts.
DO NOT FORCE onto posts.
*Make sure door knob hole is
over Side 1.
Next, carefully turn box over so that DOOR is facing down.
8
Insert 8 Cams along both sides of the interior of
the box and turn with Allen Wrench until locked
in place.
*Note that all 8 cams will
insert into interior of the
box.
14
Proprietary, patented product and assembly instructions. Do not copy or distribute.
Be certain each post is secure.
Be sure that door does not slide off posts.
x8
Locking
Cams