Carefree of Colorado ONE-Touch Instructions

Carefree of Colorado
ONE-Touch Strap Guide instructions
NOTE: COVER AND STRAP ARE NOT SHOWN FOR ILLUSTRATION
PURPOSES .
1. Disconnect Rafter from bracket, push Rafter forward, depress Rafter Spring,
and pull Rafter back off the Roll Pin and out of way (see figure A).
2. Insert Strap Guide into arm under strap and between the 1/4" inserts as shown
in figure B &C. Note: No fasteners are needed to hold Strap Guide in place.
3. Route Strap through Strap Guide as shown in figure D.
4. Reconnect Rafter on Roll Pin of bracket as shown in figure A.
Strap Guide
Rafter
Rafter Spring
Bracket
#2 Channel
1/4" Insert
1/4" Insert
Roll Pin
figure B
figure A
1/4" Insert
Roll Pin
Strap
Strap Guide
1/4" Insert
figure C
figure D
052964-001