WARNINGS
• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT
BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with appropriate electrical codes and
regulations.
• If you are unsure about any part of these instructions, consult an electrician.
Before Installation
• Installs into any single gang device back-box.
• Supports Multi-gang installations.
®
• Requires Decora
faceplate, sold separately
Installation
WARNING: TO AVOID FIRE, SHOCK, OR DEATH;
TURN OFF POWER at circuit breaker or fuse and
test that power is off before wiring!
1.
Connect as per wiring diagram.
2.
Attach to wall box.
3.
Restore power and test ON/OFF operation. LED locator light
should be ON when switch power is turned OFF.
4.
If desired, change switch color.
5.
Install Decora faceplate.
© 2019 Leviton Mfg. Co., Inc.
RF Wall Switch
Cat. No. ZS10S
Ratings: 120-277VAC, 50/60Hz.
INSTALLATION AND QUICK START SHEET
Black
Load
White
To release, push sides.
CAUTIONS
• Use this device with copper or copper clad wire only.
• For indoor applications only.
• Save these instructions.
Blue
White
Green
Ground
Neutral (White)
Load
Blue
Neutral
White
Line (Hot)
Black
Green
Ground
DI-000-ZS10S-02B
ENGLISH
Hot (Black)
Line
120/277VAC,
50/60Hz.
Line up and press in to attach.
DI-000-ZS10S-02B
Need help?
Do you have a question about the Lumina ZS10S and is the answer not in the manual?
Questions and answers