Leviton DECORA VPT24 Programming Manual

Leviton DECORA VPT24 Programming Manual

Advertisement

VPT24

Programming Guide

Pro Mode provides up to 50 ON/OFF events for any day or combination of days, M-Su, M-F, or Sa-Su at
desired fixed times or self adjusting Sunup and Sundown times. In this mode self adjusting Daylight
Savings Time and random modes are also available.
Do you have a California-exclusive model VPT24?
If you're unsure, press
MENU
To exit programming at any time press override button -
To program your device:
a) Perform a System Reset by gently lifting the VPT24 door
from the bottom of the push pad until an audible click is
heard. The door will stay open while you are
programming the device:
b) Press and hold
followed by
SET
stops flashing and
10 seconds). Press
SET
c) Product will go through a brief self test.
Door held open
Override button
3 times until RND displays, then press
(Override) until
flashes (approximately
to confirm device Reset.
. '6 Hr' will display on California-exclusive models.

1. Setting up the Time and the Date:

a)
will be flashing. Press
A
hour and press
to confirm your choice.
SET
b)
A
will be flashing. Press
minutes and press
SET
c) A or P will be flashing. Press
for AM or P for PM and press
NOTE: Daylight Savings Time shall start at 2am on the
second Sunday of March (add one hour) and end at 2am
on the first Sunday of November (subtract one hour).
d)
will be flashing. Use
and press
to confirm your choice.
SET
e)
will be flashing. Use
month and press
to confirm your choice
SET
f)
will be flashing. Use
and press
to confirm your choice. The day of week
SET
will automatically adjust.

2. Programming your Timer Options:

a) Setting Sunup, Sundown, desired O set Time and
Time Zone: Sunup and Sundown are automatically
adjusted using the latitude and longitude
coordinates of your location. To obtain these
coordinates go to www.leviton.com/VPT24 and
click on Longitude/Latitude Coordinates Lookup...
Type in your home address and press enter. Your
latitude (N) and longitude (W) coordinates will be
shown on the screen. Write down only the 2 or 3
digit number. Disregard a negative symbol (–) if it
precedes the number.
or
to select the
or
to select the
to confirm your choice.
or
to select A
to confirm your choice.
SET
or
to choose the year
or
to choose the
or
to choose the date

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DECORA VPT24 and is the answer not in the manual?

Questions and answers

Herb Duell
May 27, 2025

How do you change the on/off times for lights that are already programmed? for VTP24 24 HOUR

1 comments:
Mr. Anderson
May 27, 2025

To change the on/off times for lights on the Leviton VPT24:

1. Press the "Set" button when the time symbol appears on the screen.
2. Use the up or down arrows to select the hour for the on time, then press "Set."
3. Use the arrows to set the minutes, then press "Set."
4. The off time setting will appear next. Use the same process:
- Press "Set" to confirm the default or change it.
- Use arrows to select the off hour and press "Set."
- Use arrows to set the minutes and press "Set."
5. Follow the same steps to set up additional on/off events (up to three total).
6. Press the "Override" button to exit programming mode.

This answer is automatically generated

Glenn Fujii
May 14, 2025

Using the VPT24-1PZ product, how do you override programming to turn light off manually? Currently, my light is on all the time. Please advise

1 comments:
Mr. Anderson
May 21, 2025

To manually override programming and turn off the Leviton VPT24-1PZ light, press and hold the paddle switch. The upper left icon on the display will change to a non-blinking clock with a slash, indicating the light is permanently off and the next scheduled on event will not take effect. To return to normal program mode, tap the paddle switch.

This answer is automatically generated

Ken
February 14, 2025

Can you replace the battery in the VPT24 24-Hour Programmable Timer? If so, how?

Summary of Contents for Leviton DECORA VPT24

  • Page 1: Programming Guide

    Time Zone: Sunup and Sundown are automatically adjusted using the latitude and longitude coordinates of your location. To obtain these coordinates go to www.leviton.com/VPT24 and Override button click on Longitude/Latitude Coordinates Lookup... Type in your home address and press enter. Your latitude (N) and longitude (W) coordinates will be shown on the screen.
  • Page 2 Leviton Manufacturing Co., Inc. World Headquarters Visit our Website at: www.leviton.com 201 North Service Road, Melville, NY 11747-3138 © 2017 Leviton Manufacturing Co., Inc. All rights reserved. All trademarks are the property of their respective owners. Telephone: 1-800-323-8920 FAX: 1-800-832-9538...

Table of Contents

Save PDF